Table of Contents
Advertisement
5. USING THE HOB
Check that the flame crowns, the burner caps and grids
are correctly assembled. Pins A of the flame crowns must
be inserted in housings
B of the burner rings, and pins C on the grids must be
blocked in their respective housings on the hob.
5.1
Ignition of the burners
The device is fit with electronic ignition. Simply press and simultaneously turn
the knob counter-clockwise on the low flame symbol
ignited.
The burner might go off when the knob is released. In this case repeat the
aforesaid operation keeping the knob pressed for more than 2 seconds.
Should the burners go off accidentally in the models with valves, a safety device
will trip after approximately 20 seconds to block the gas outlet even if the cock is
open.
5.2
Practical tips for using the burners
For better burner performance and minimum gas consumption, flat bottomed,
even pans must be used, with covers and proportional in size to the burners
(see paragraph "5.3 Pan diameters").
To avoid overcooking or damage to the surface top while cooking, all pans or
griddles must be positioned within the cooking hob perimeter and must be at a
minimum distance of 3-4 cm from the knobs.
5.3
Pan diameters
HOB BURNER
1 Auxiliary
2 Semi rapid
3 Medium rapid
4 Large rapid
5 Ultra rapid
10
Instructions for the user
Ø min. and max. (in cm)
7 - 18
10 - 24
18 - 24
20 - 24
20 - 28
, until the burner is
Advertisement
Table of Contents
