Installing The Sfp Transceivers (Optional) - Hirschmann MICE MS20-1600 Series User Manual

1
2
3
4
5
Figure 12: Labels for basic modules and media modules
1 - MICE basic module
2 - Lable for the name of the module
3 - Lable for MAC address of the device
4 - Lable for IP address of the device
5 - Lable for other entries on your demand
6 - MICE media module
7 - Lable for the name of the media module
8 - Lable for the port assignment of the media module (port 1)
9 - Lable for the port assignment of the media module (port 1)
10 - Lable for the port assignment of the media module (port 1)
11 - Lable for the port assignment of the media module (port 1)
 Attach the labels included in the delivery to the basic module and the
media modules as required.
2.4

Installing the SFP transceivers (optional)

 To attach an SFP transceiver, first remove the protective cap over the
socket.
 Push the SFP transceiver with the lock closed into the socket until it
latches audibly in place.
Note: Only use Hirschmann SFP transceivers.
Installation MS20/MS30
Release 11 07/2013
6
7
8
9
10
11
33