Manual Operation / Info - ATB AQUAmax BASIC series Operation And Maintenance Manual

Operation and maintenance manual AQUAmax
Floating contact
Factory settings
Test run
Winter operation
Manual mode
programme sequence is maintained (all units = OFF) and following ending of the manual operation
is continued at the respective point.
Indicated are the position of the float switch and the actual current consumption.
Info
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-No.: 9060 0210 / Status: 30.01.2019 / Page 16 from 40
®
BASIC/CLASSIC
Activation/deactivation of the floating contact
(Standard: deactivated).
All parameters are set back to the values for the
selected plant type and the population figure.
Mode of operation s. Commissioning.
Activation/deactivation of the winter operation
(Standard: activated).
With the activation the aeration times in the
months December, January and February are
reduced by 20% (no further reduction following
activated sludge removal).
In the manual mode the individual units can be
commissioned manually and the function of the
potential-free contact can be checked.
With the changeover to manual operation the normal
Under this point you can call up the details for the
selected type, the PT value set, the version number and
the date of commissioning.