Commissioning - ATB AQUAmax BASIC series Operation And Maintenance Manual

Operation and maintenance manual AQUAmax

Commissioning

With first commissioning basic settings and tests are carried out. Please ensure that all information
for this is available. With input of the plant values all important parameters are pre-set. However,
we recommend that, following commissioning, the parameters are again checked under
Settings, as false values can, inter alia, lead to an increased power consumption.
In the Service Mode you have the possibility later of undertaking modifications.
Language selection
Password input
Date and time
Selection of the plant type
Number of inhabitants
Serial number
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-No.: 9060 0210 / Status: 30.01.2019 / Page 10 from 40
Enter language you need.
Please enter the six-figure code number.
Enter the date and time.
Important for the correct entries in the logbook
Select between BASIC, CLASSIC or AQUAPRIMO.
Select the connected PT.
The settings belonging to the number of inhabitants are carried out
automatically.
Enter the serial number, which is located on the frame of the
(not the serial number of the control
number is entered right-aligned, in order that leading zeros result.
®
BASIC/CLASSIC
unit), here. Please ensure that the serial
®
AQUAmax