Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ATB AQUAMAX PRO G
Summary of Contents for ATB AQUAMAX PRO G
- Page 1 Innovations for clean water ® AQUAMAX PRO G Operating Instructions...
- Page 2 Operating instructions AQUAMAX ® PRO G ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 2 from 36...
-
Page 3: Table Of Contents
Important data for fault diagnosis of the electrical units ............33 EC Declaration of Conformity ....................34 ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 3 from 36... -
Page 4: General And Safety Information
AQUAMAX ® is used for other employment purposes without the express approval of ATB WATER GmbH and/or if the following safety information is disregard, this can lead to the hazarding or injury of persons and to malfunctions of or defects in the plant. In this case every liability is excluded. - Page 5 Danger of injury! Only with the use of original spare parts or with spare parts authorised by ATB can correct function be assured. Before commissioning all points of the operating instructions are to be checked again.
-
Page 6: Functional Description
Under normal load, the system switches back to the set operating mode. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 6 from 36... - Page 7 The AQUAMAX® PRO G is designed for the treatment of domestic wastewater. It is particularly suitable for objects with irregular waste water production, e.g. hotels, restaurants, butcher's shops, etc. For the treatment of waste water from e.g. apartments, other ATB sewage treatment plants can be used.
-
Page 8: Cycle Process
PRO: when the lower float switch in the buffer [SW3] has floated up at the start of the charging / denitrification phase and a charging is carried out. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 8 from 36... - Page 9 Take note of status indicators! ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 9 from 36...
-
Page 10: The Control System Procontrol © 2
Following power failure (< 30 min) restart at the interrupted program point Wide range power supply 110 – 250V, 50/60Hz ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 10 from 36... -
Page 11: Assembly
Depending on the type of plant, the displays can differ slightly from the displays in this manual. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 11 from 36... -
Page 12: Commissioning
In the case of wrong settings, the commissioning may finally restart by entering “no”. Confirm the correct entries with OK. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 12 from 36... -
Page 13: Display Information / Main Menu / Logbook
Example: CW timeout for exceeded runtime of the clear water pump ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 13 from 36... - Page 14 When the 5th file has been completed, a signal consisting of 4 beeps is heard. The USB stick can now be removed. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 14 from 36...
-
Page 15: Settings
Alarm 6 = noiseless. Should only be selected if another alarm is present (flashing light or GSM transmission). ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 15 from 36... -
Page 16: Service Mode
To enter and to change relevant parameters. The data displayed under "Info" result from the entries and can only be changed indirectly. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 16 from 36... - Page 17 150 l/PT/d and a cycle duration of 8h with 3 feedings per cycle. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 17 from 36...
- Page 18 (aerator ON mixer OFF, aerator OFF mixer ON). nitri aer. ON/OFF Setting parameter for the intermittent aeration during nitrification. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 18 from 36...
- Page 19 Note: Test run during settling phase may have the consequence that with next clear water evacuation activated sludge is pumped out. Serial number (see commissioning) ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 19 from 36...
- Page 20 December, January and February. Factory settings All parameters are reset to standard factory settings (see appendix). ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 20 from 36...
-
Page 21: Manual Mode / Info / Date, Time
(SID). Date / time Input / modification of date and time. Important for correct logbook entries! ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 21 from 36... -
Page 22: Language / Error Reset
Please inform your maintenance company immediately after an error message occurs. This will take care about all necessary measures. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 22 from 36... -
Page 23: List Of Pre-Programmed Parameters / Current Limits
"Feeding duration" and "I min / I max feed 1". Due to a pump changeover, these parameters may have to be set manually! Please note ! ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 23 from 36... -
Page 24: Possible Error Messages
The corresponding unit is defective. Call service Air bubble in the pump (C1, C2, SL). Call service ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 24 from 36... - Page 25 Eliminate the cause for high sewage / seal inflow. the leakage of infiltration water. Incorrect value for the max. pumping time. Change the setting. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 25 from 36...
- Page 26 Pre-fuse 1 A of the power device is defective. (one spare fuse inside the cover of the connection box). ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 26 from 36...
-
Page 27: Technical Data
NO = Normally Open; NC = Normally Closed; C or CO = common conductor ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 27 from 36... -
Page 28: Terminal Box
F4 clearwaterpump 2 (C2) feedpump 1 (F1) F5 F6 feedpump 2 (F2) aerator 1 (A1) F7 F8 aerator 2 (A2) ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 28 from 36... -
Page 29: Software Update / Save Screenshot To Usb / Fast Forward Cycle / Shut Down Control Unit
To conserve accumulator capacity, the control unit should be shut down after disconnecting the power supply. For this press and hold the OK key for at least 3 seconds. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 29 from 36... -
Page 30: Information On Maintenance
Frequently, the lower water authority demands the transmission of the maintenance report by the operator or the maintenance firm. after each maintenance. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 30 from 36... -
Page 31: Fault Correction
The hydraulic system in the Call service support. AQUAMAX for the interruption of the charging pipeline is impaired. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 31 from 36... - Page 32 (check power intake). The electrical unit Call service support. concerned is defective. ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 32 from 36...
-
Page 33: Important Data For Fault Diagnosis Of The Electrical Units
AQUA 200 SV Submersible motor pumps ATBLift 1 ATBLift 2 1.25 NOVA 180 SV NOVA 200 SV FEKA 600 ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com / Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 33 from 36... -
Page 34: Ec Declaration Of Conformity
Declaration of EC-conformity ATB WATER GmbH The manufacturer: Südstr. 2 D-32457 Porta Westfalica declares herewith, that the following AQUAMAX ® specified product: 2006/42/EG Directive on machinery implements the requests of following EC- 2014/30/EU Directive to Directives: electromagnetic compatibility 2014/35/EU Directive to electrical... - Page 36 ® Operating Instructions AQUAMAX PRO G oCE / Art.-No.: 9060 0272 / Status 24 February 2021...
Need help?
Do you have a question about the AQUAMAX PRO G and is the answer not in the manual?
Questions and answers