RetroSound RetroRadio Apache User Manual page 21

OPERATING YOUR RADIO
Display Frequency/Clock
Using the right-front knob (#4), this sub-menu allows you to adjust the
priority screen view between radio frequency ( ) and clock
DISP FREQ
( ).
CLK
Clock ON/OFF
Using the right-front knob (#4), this sub-menu allows you to turn off
the clock when the radio is off. Default is .
CLK ON
Beep On/Off
Using the right-front knob (#4), this sub-menu controls the audible
beep confirmation that sounds during operation of the radio. Select
to hear the audible beep, and to disable the audible
BEEP ON BEEP OFF
beep.
Display Color (SCAN)
This sub-menu changes the display color. The default setting is ,
SCAN
which will scan through all of the available colors. To customize your
display color, look for the word in the sub-menu (if a custom
SCAN
color has already been chosen, look for that color name in the sub-
menu), then press the right-front knob (#4) to select one of the pre-set
colors: , , , , , , , ,
white green 1 green 2 green 3 orange red pink purple 1
, , , .
purple 2 blue 1 blue 2 user, Scan
To create a custom color, select in the pre-set color menu, then
USER
rotate the right-front knob (#4) once. The display will say . Now
RGB
press the right-front knob (#4) once. This will allow you to edit the RGB
values for 32,000 color variations. Rotate the right-front knob (#4) to
adjust the reds, then press the same knob (#4) to move to the greens.
Repeat this process to adjust the greens and the blues.
NOTE: If you lower all RGB settings down to "00" the display will go black, and you will
need to reset the radio by disconnecting all power from the unit for 2 minutes.
20
Copyright © 2019 Retro Manufacturing, LLC