RetroSound RetroRadio Apache User Manual page 26

BLUETOOTH
Placing a Call
1. Dial the desired number on the paired phone.
2. Once dialing is in progress,
3. Once the call is in progress,
screen along with the elapsed call time (
Receiving a Call
1. If a call is incoming, any audio playback from the current
source will either be muted or paused (depending on the
source) and
with the caller ID if it is enabled by the phone/carrier.
2. To accept the call, turn the left-rear knob (#2)
counter-clockwise.
Ending a Call
To end the call, turn the left-rear-knob (#2) counter-clockwise.
Streaming Music From Your Device
1. Once your device is paired with your radio, make sure the
source mode is set to
2. Next, select your desired playback source on your device
(iTunes
®
would.
25
DEVICE INSTRUCTIONS
®
will be shown on the screen along
PHONE IN
BT AUDIO
, Pandora , etc) and play the music as you normally
®
will appear on the screen.
CALLING
will appear on the
TALK
TALK 00:00
.
).