uuWhen DrivinguAdjusting Headlight Distribution
Adjusting Headlight Distribution
Driving the right-hand type vehicle in right-hand traffic, or the left-hand type vehicle
in left-hand traffic causes headlight glare to oncoming vehicles. You need to alter
the headlight beam distribution using masking tape.
1. Prepare for two pieces of masking tape, measuring 40 mm (1.57 inches) wide and
40 mm (1.57 inches) long.
u
Use masking tape that can shut out light, such as seal type waterproof vinyl.
2. Affix the tape to the outer portion of the lens as shown.
554
1Adjusting Headlight Distribution
Be careful not to adhere the tape to an incorrect
location. If the headlight beam is distributed
incorrectly, it may not comply with your country's
legal requirements. Ask your dealer for details.