Honda CR-V 2019 Owner's Manual page 293

uuClimate Control SystemuUsing Automatic Climate Control
Use the system when the engine is running.
1. Press the AUTO button.
Models with colour audio system
2. Adjust the interior temperature using the temperature control dial.
Models with Display Audio
2. Adjust the interior temperature using the driver's side or passenger's side control
dial.
3. Press the (on/off) button to cancel.
■
Switching between the recirculation and fresh air modes
Press the (recirculation) or
depending on environmental conditions.
Recirculation mode (indicator on): Recirculates air from the vehicle's interior
through the system.
Fresh air mode (indicator on): Maintains outside ventilation. Keep the system
in fresh air mode in normal situations.
292
(fresh air) button to switch the mode
1Using Automatic Climate Control
The AUTO indicator will go off, but functions
unrelated to the button that were pressed will be
controlled automatically.
To prevent cold air from blowing in from outside, the
fan may not start immediately when the AUTO
button is pressed.
Models with Auto Idle Stop
During idle-stops, air-conditioning is suspended, and
only the blower remains active.
If you do not want air-conditioning suspended, press
the Auto Idle Stop system OFF button to cancel idle-
stop.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on AUTO, and setting the
temperature to low. Change the fresh mode to
recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper
limit, Lo or Hi is displayed.
Pressing the button switches the climate control
system between on and off. When turned on, the
system returns to your last selection.
While ECON mode is active, the climate control
system may have reduced cooling performance.