■
Phone Setup
■
To pair a mobile phone (when there is
no phone paired to the system)
1. Select
.
2. Select Yes.
3. Make sure your phone is in search or
discoverable mode, then select Continue.
u
HFT automatically searches for a
Bluetooth® device.
4. Select your phone when it appears on the
list.
u
If your phone does not appear, you can
select Refresh to search again.
u
If your phone still does not appear, select
Phone Not Found and search for
Bluetooth® devices using your phone.
From your phone, search for Honda
HFT.
5. The system gives you a pairing code on the
audio/information screen.
u
Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
uuHands-Free Telephone SystemuHFT Menus
1Phone Setup
Your Bluetooth-compatible phone must be paired to
the system before you can make and receive hands-
free calls.
Phone Pairing Tips:
•
You cannot pair your phone while the vehicle is
moving.
•
Up to six phones can be paired.
•
Your phone's battery may drain faster when it is
paired to the system.
•
If your phone is not ready for pairing or not found
by the system within three minutes, the system will
time out and return to idle.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following:
: The phone can be used with HFT.
: The phone is compatible with Bluetooth® Audio.
If there is an active connection to Apple CarPlay,
pairing of additional Bluetooth-compatible devices is
unavailable and Add Bluetooth Device is greyed
out from the Bluetooth Device List screen.
Continued
469