■
Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
Memory
Button 1
Memory
Button 2
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
1. Set the power mode to ON. Adjust the
driver's seat to the desired position.
2. Press the SET button.
u
The memory button indicator light will
blink.
3. Press and hold memory button
within five seconds of pressing the SET
button.
u
Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
Continuously variable transmission models
1. Put the transmission into
(
P .
2. Press a memory button (
1 or
(
u
The indicator light will blink.
Manual transmission models
1. Apply the parking brake.
2. Press a memory button (
1 or
(
u
The indicator light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, the indicator light stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be cancelled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the double-
beep.
•
You set the power mode to any position except
1 or
(
(
2
ON.
1Recalling the Stored Position
The seat will stop moving if you:
•
Press the SET button, or a memory button (
).
(
2
2 ).
(
•
Adjust the seat position.
•
Put the transmission into a position other than
(continuously variable transmission).
•
Release the parking brake (manual transmission).
2 ).
(
*
(
1
or
(
P
243