Braking; Brake System; Parking Brake; To Apply/To Release - Honda CR-V 2019 Owner's Manual

Hide thumbs Also See for CR-V 2019:
Table of Contents

Advertisement

Braking

Brake System

Parking Brake

Use the parking brake to keep the vehicle stationary when parked. When the
parking brake is applied, you can manually or automatically release it.
Electric Parking
Brake Switch
Electric Parking
Brake Switch
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
To apply
The electric parking brake can be applied any
time the vehicle has battery, no matter which
position the ignition switch
*1
is in.
Pull the electric parking brake switch up gently
and securely.
u
The parking brake and brake system
indicator (red) comes on.
To release
The ignition switch must be ON
to release the electric parking brake.
1. Depress the brake pedal.
2. Press the electric parking brake switch.
u
The parking brake and brake system
indicator (red) goes off.
Manually releasing the parking brake using
the switch helps your vehicle start slowly and
smoothly when facing down hill on steep hills.
1Brake System
When you depress the brake pedal, you may hear a
whirling sound from the engine compartment. This is
because the brake system is in operation, and it is
normal.
1Parking Brake
You may hear the electric parking brake system
motor operating from the rear wheel area when you
apply or release the parking brake. This is normal.
The brake pedal may slightly move due to the electric
parking brake system operation when you apply or
release the parking brake. This is normal.
You cannot apply or release the parking brake if the
battery goes dead.
*1
in order
w
(
2 Jump Starting P. 746
If you pull up and hold the electric parking brake
switch while driving, the brakes on all four
wheels are applied by the VSA system until the
vehicle comes to a stop. The electric parking
brake then applies, and the switch should be
released.
Manual transmission models
The engine will not start unless the electric parking
brake is engaged. If the vehicle stalls on a slope, the
electric parking brake system may automatically
engage. If it does not, engage it manually, then start
the engine again.
Continued
629

Advertisement

Table of Contents
loading

Table of Contents