Table of Contents
Advertisement
uuIndicatorsu
Indicator
Road Departure
Mitigation
Indicator
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
114
Name
On/Blinking
• Comes on for a few seconds when
you turn the ignition switch to ON
(
w
*1
, then goes off.
• Comes on if there is a problem with
the road departure mitigation
system.
• Comes on if the road departure
mitigation system is deactivated
temporarily after the battery has
been disconnected, then re-
connected.
• Indicator may comes on temporarily
when the Maximum Load Limit is
exceeded.
Explanation
• Stays on constantly - Have your
vehicle checked by a dealer.
• Drive a short distance at more than 20
km/h (12 mph). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
• Make sure the total load is within the
Maximum Load Limit.
2 Load Limit P. 503
• Stays on constantly - Have your
vehicle checked by a dealer.
Message
—
Advertisement
Table of Contents
