Table of Contents
Advertisement
Ultrasonic Sensors
The ultrasonic sensors activate only when the security system alarm is set. If the
sensors detect an intruder moving around inside or entering the interior of the
vehicle through a window, the sensor will activate the alarm.
■
To set the security system alarm without activating the ultrasonic sensors
You can set the security system alarm without activating the ultrasonic sensors.
Ultrasonic Sensor OFF Button
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
* Not available on all models
*
To turn off the ultrasonic sensor system, press
the ultrasonic sensor OFF button after you
remove the key from the ignition switch, or
with the key in the ACCESSORY
(
0
*1
.
u
The
is on in red.
To turn it on again, press the ultrasonic sensor
OFF button.
Ultrasonic sensors is turned on every time you
set the security system alarm, even if you
turned it off the last time.
uuSecurity SystemuUltrasonic Sensors
1Ultrasonic Sensors
Whether the ultrasonic sensors has been activated or
not, the security system can only be turned off by the
remote transmitter or keyless access system
key.
It is possible to confirm whether the vehicle security
system was activated without your knowledge. If the
security system has been activated, the
for 5 minutes after you unlock the door and disable
q or LOCK
(
the system.
If, however, you start the engine, the
blinking after 5 seconds.
If the ultrasonic sensor is malfunctioning or there is
another problem, the
after you unlock the door and disable the system.
If, however, you start the engine, the
off.
The security system may accidentally activate by
ultrasonic sensors such as when:
•
Someone is in the vehicle
•
A window is open
•
Accessories or clothes are hanging in the vehicle.
*
*
, not the
will blink
will stop
will come on for 5 minutes
will shut
*
207
Advertisement
Table of Contents
