Adjusting Headlight Distribution - Honda Civic 2016 Manual

Australian and South African models with LED headlights

Adjusting Headlight Distribution

Driving the right-hand type vehicle in right-hand traffic, or the left-hand type vehicle
in left-hand traffic causes headlight glare to oncoming vehicles. You need to alter
the headlight beam distribution using masking tape.
Centre point
1. Prepare for two rectangular pieces of masking tape, measuring 40 mm wide and
80 mm long.
u Use masking tape that can shut out light, such as seal type waterproof vinyl.
2. Affix the tape to the lens as shown.
Centre point
uuWhen DrivinguAdjusting Headlight Distribution
1Adjusting Headlight Distribution
Be careful not to adhere the tape to an incorrect
location. If the headlight beam is distributed
incorrectly, it may not comply with your country's
legal requirements. Ask your dealer for details.
467