Tilt Sensor; To Set Security System Alarm Without Activating Tilt Sensor - Honda CR-V 2019 Owner's Manual

Hide thumbs Also See for CR-V 2019:
Table of Contents

Advertisement

uuSecurity SystemuTilt Sensor
*

Tilt Sensor

The tilt sensor activates only when the security system alarm is set. If someone raises
the vehicle in an attempt to tow the vehicle or remove the wheels etc., the sensor
will activate the alarm.
To set the security system alarm without activating the tilt sensor
You can set the security system alarm without activating the tilt sensor.
Tilt Sensor OFF Button
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
* Not available on all models
208
*
To turn off the tilt sensor system, press the tilt
sensor OFF button after you remove the key
from the ignition switch, or with the key in the
ACCESSORY
q or LOCK
(
u
The
is on in red.
To turn it on again, press the tilt sensor OFF
button.
Tilt sensor is turned on every time you set the
security system alarm, even if you turned it off
the last time.
1Tilt Sensor
Whether the tilt sensor has been activated or not, the
security system can only be turned off by the remote
transmitter or keyless access system
It is possible to confirm whether the vehicle security
system was activated without your knowledge. If the
security system has been activated, the
for 5 minutes after you unlock the door and disable
the system.
*1
.
(
0
If, however, you start the engine, the
blinking after 5 seconds.
If the tilt sensor is malfunctioning or there is another
problem, the
unlock the door and disable the system.
If, however, you start the engine, the
Do not set the tilt sensor when the vehicle is lifted or
jacked up.
*
*
, not the key.
will stop
will come on for 5 minutes after you
will shut off.
will blink

Advertisement

Table of Contents
loading

Table of Contents