Phone Setup - Honda CR-V 2019 Owner's Manual

■

Phone Setup

■
To pair a mobile phone (No phone has
been paired to the system)
1. Press the button or the
2. Rotate to select Yes, then press
3. Press to select OK.
4. Make sure your phone is in search or
discoverable mode.
u HFT automatically searches for a
Bluetooth® device.
5. When your phone appears on the list, select
it by pressing .
u If your phone doesn't appear, select
Phone not found? and search for
Bluetooth® devices using your phone.
From your phone, select Honda HFT.
6. The system gives you a pairing code on the
audio/information screen.
u Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
7. A notification appears on the screen if
pairing is successful.
uuHands-Free Telephone SystemuHFT Menus
1Phone Setup
Your Bluetooth-compatible phone must be paired to
HFT before you can make and receive hands-free
calls.
button.
Phone Pairing Tips:
.
•
You cannot pair your phone while the vehicle is
moving.
•
Up to six phones can be paired.
•
Your phone's battery may drain faster when it is
paired to HFT.
•
If your phone is not ready for pairing or not found
by the system within 30 seconds, the system will
time out and return to idle.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following:
: The phone can be used with HFT.
: The phone is compatible with Bluetooth® Audio.
Continued 447