Storing A Driving Position In Memory; Driving Position Memory System - Honda Odyssey Owner's Manual

Driving Position Memory System

On Touring models
Your vehicle has a memory feature
for the driver's seat and outside
mirror positions.
Two seat and outside mirror
positions can be stored in separate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2).
This setting can be linked or
unlinked with the remote transmitter.
For more information, see page
You can change the ''MEMORY
POSITION LINK'' setting on the
multi-information display (see page
116 ).
184
Storing a Driving Position in
Memory
Store a driver's seat position only
when the vehicle is parked.
1. Turn the ignition switch to the ON
(II) position. You cannot add a
new seat position in memory
unless the ignition switch is in the
ON (II) position. You can recall a
memorized position with the
ignition switch in any position.
2. Adjust the seat to a comfortable
position (see page
149 .
3. Adjust the outside mirrors for best
visibility (see page
2010 Odyssey
INDICATORS
4. Press and release the MEMO
169 ). button on the driver's door. You
will hear a beep. Then, both
indicators in the memory buttons
). will start to blink. Press and hold
191
one of the memory buttons (1 or
2) within 5 seconds after you press
the MEMO button. When the
system completes storing a new
driving position, you hear two
beeps. The indicator in the stored
memory button will come on.
MEMO BUTTON
MEMORY
BUTTONS