Installation / Dismantling; Installation; Dismantling - RADEMACHER DuoFern Connect Instruction Manual For The Electrical Connection And For Commissioning

i

9. Installation / Dismantling

The DuoFern Connect actuator is intended for surface-mounting.
ATTENTION
In order to ensure optimal operation, the DuoFern Connect actua-
tor should not be installed on a metallic base or near metal objects.
i

9.1 Installation

1. Switch off the mains.
2. Connect DuoFern Connect actuator in accordance with
chapter 10. - 10.2.
3. Mount the DuoFern Connect actuator.
4. Reconnect the mains power.
5. Register the DuoFern Connect actuator in the DuoFern radio
network, see chapter 11.
i

9.2 Dismantling

1. Log off the DuoFern Connect actuator from the DuoFern
radio network, see chapter 11.
2. Switch off the mains.
3. Disconnect and demount the DuoFern Connect actuator.
4. Prepare the system for operation and switch the power
back on.
38
EN