Folding Table - Mercedes-Benz V-Class Operating Instructions Manual

loads against slipping or tipping before the
journey.
G
WARNING
If the folding table is not properly engaged in
the fastening fixtures, it could break free and
be flung around during the journey. There is a
risk of an accident and injury.
Install the folding table as described. Only
move the folding table when the vehicle is
stationary. After moving it, always make sure
that the folding table is properly engaged.
The folding table is only secured correctly when
both locking and unlocking levers are engaged.
Observe the "Loading guidelines" (
Installing the folding table
G
WARNING
If the folding table is not properly engaged in
the fastening fixtures, it could break free and
be flung around during the journey. There is a
risk of an accident and injury.
Install the folding table as described. Only
move the folding table when the vehicle is
stationary. After moving it, always make sure
that the folding table is properly engaged.
The folding table is only secured correctly when
both locking and unlocking levers are engaged.
X
Push the front seats back fully or, if neces-
sary, remove.
X
Lift off both covers : from the guide rail
using a suitable tool, e.g. a screwdriver.
X
Press both covers : slightly together and
remove from the guide rail.
The rail openings for the middle sliding rail on
the underside of the folding table are open.
X
Rotate the folding table until the arrow on the
Y
page 328).
underside of the folding table is pointing in the
direction of travel.
Installation position
X
Insert the folding table into the guide rails so
that arrows ; on the folding table point to
both markings = on guide rail ?.
The guides and sliding rail on the underside of
the folding table fit into the guide rail.
X
Pull lever A on the front or rear side of the
folding table upwards and push the folding
table backwards.

Folding table

Z
315