Mercedes-Benz V-Class Operating Instructions Manual page 108

Seats
106
Backrest release handles
:
Release handles for rear seat anchorage
;
Grab handles
=
You can fold the rear bench seat fully forwards.
X
Remove the head restraints (
X
To fold down the seat backrest (table
position): pull backrest release handle : up
and fold forward.
X
Pull release handles for rear seat anchor-
age ; up and tilt the rear bench seat.
X
Grasp rear bench seat grab handles = and
fold the seat forwards.
Removing and fitting the rear bench
seat
G
WARNING
If the rear bench seat is not fully engaged, it
may be thrown about while the vehicle is mov-
ing. There is a risk of an accident and injury.
Always make sure that the rear bench seat is
fully engaged as described.
The only way to ensure that the rear bench seat
will engage securely is to always keep the seat
anchorages clean and free of foreign objects.
Always observe the notes about the seating var-
Y
iants ( page 100).
Y
page 118).
:
;
=
?
A
i
sequent replacement of the rear bench seats
at the basic position marked (
X
To remove: make sure that all carriages for
fore-and-aft adjustment are engaged on both
sides.
It should not be possible to move the rear
bench seat.
X
Fold the rear bench seat forwards
Y
(
X
Pull release handle ? upwards.
X
Hold the rear bench seat by grab handles =
and lift it out of seat anchorages A.
X
To fit: hold the rear bench seat by grab han-
dles = and guide it into front seat ancho-
rages A at an angle from above.
Backrest release handles
Release handles for rear seat anchorage
Grab handles
Release handle for front seat legs
Seat anchorages
Only carry out the release, removal and sub-
page 105).
Y
page 108).