Mercedes-Benz V-Class Operating Instructions Manual page 166

Operating the auxiliary heating system
164
X
To switch on: press and hold the Ü button
until indicator lamp : lights up red.
If a connection between the remote control
and the receiver in the vehicle has been estab-
lished and indicator lamp ::
flashes red, the auxiliary heating is
R
switched off.
lights up green, the auxiliary heating is
R
switched on.
X
To switch off: press and hold the Ü but-
ton until indicator lamp : goes out.
Switching auxiliary heating on and off
X
Switch on the remote control (
X
To switch on: when indicator lamp : flashes
red, press the b button.
During data transmission, indicator lamp :
lights up red.
When indicator lamp : lights up green, the
auxiliary heating is switched on.
X
To switch off: when indicator lamp : lights
up green, press the b button.
During data transmission, indicator lamp :
lights up red.
When indicator lamp : flashes red, the aux-
iliary heating is switched off.
Changing the operating duration
X
Switch on the remote control (
X
When indicator lamp : flashes red, press
Ü and b simultaneously.
Indicator lamp : flashes green.
X
Press the Ü button repeatedly until the
desired operating duration is shown.
20 minutes
R
Indicator lamp : flashes green twice.
30 minutes
R
Indicator lamp : flashes green three
times.
40 minutes
R
Indicator lamp : flashes green four times.
X
Press the b button.
During data transmission, indicator lamp :
lights up red.
If indicator lamp : emits two long, green
flashes, the selected operating duration is
stored.
If no adjustment is made, indicator lamp :
flashes six times and the remote control goes
into standby mode.
Operating the auxiliary heating using
the timer
Timer overview
Y
page 163).
Timer in the lower centre console
Program column
:
G Sets preset position 1 – 3 for depar-
ture times
Sets weekday (Mon. – Sun.)
Menu bar
;
y Activates/deactivates immediate
heating mode (heater booster function)
B Sets the departure times
Ñ Sets the day, time and the operating
duration
ß Sets the heating level
Y
page 163).
Display panel for: time, heating level and
=
operating duration
à Continuous operation active
ß Heating level set
Selects options in program column : or
?
menu bar ; (forwards)
Increases values
Confirms a selection or setting
A
Status bar
B
y Heating mode activated
Activates the timer
C
Cancels or ends settings in a menu
Selects options in program column : or
D
menu bar ; (backwards)
Reduces values
Use the timer to:
activate/deactivate immediate heating mode
R
(heater booster function) y
Y
(
set up to three departure times B G
R
Y
(
page 165)
page 165)