Mercedes-Benz V-Class Operating Instructions Manual page 114

Seats
112
X
To remove: make sure that all carriages for
fore-and-aft adjustment are engaged on both
sides.
It should not be possible to move the rear
seat.
X
Fold the seat forwards (
X
Remove cover ? of the floor socket.
X
Remove the blind cap from the bracket on the
seat.
X
Press in the sides of electrical connection B
in socket A and remove.
X
Insert the blind cap into socket A and close
the floor socket with cover ?.
X
Secure electrical connection B onto bracket
C on the seat.
Y
page 109).
X
Hold the seat by handle =.
X
Fold up both release handles ;.
X
Move the folded seat towards the front.
X
Lift the seat up and out.
X
To fit: hold the seat by handle =.
X
From above, guide the seat in a tilted position
into front floor anchorages : and allow to
engage.
The seat is correctly engaged only when the
front seat anchorages engage audibly.
X
Remove cover ? of the floor socket.
X
Remove the blind cap from socket A.
X
Remove electrical connection B for the seat
heating and seat ventilation from bracket C
and insert into socket A.
X
Attach the blind cap to bracket C on the seat.
X
Close the floor socket with cover ?.
X
Fold the seat back to the table or upright
Y
position ( page 109).
X
Slide the seat into the standard position
Y
( page 108).
Seat/berth combination
General notes
! If you pull the seat belts to adjust the back-
rest, the function of the belt retractor may be
impaired. The seat belts may then fail to pro-
vide the intended protection.
In particular, always grip the retainer loop on
the centre seat when adjusting the backrest
to an upright position.
! If you grasp and push the seat/bunk com-
bination on the stowage compartment plastic
panel only, the panel may break off. Always
grasp therefore, the loop between the seat
cushion and seat backrest to move the seat/
bunk combination.
Before moving the seat/bunk combination,
make sure that the space in front of or behind
the seat/bunk combination is free and that no
objects can become trapped.
The seat/bunk combination, trim or the
objects may become damaged.