Malmet Energy Saver ES910 Operation, Maintenance And Installation Manual page 29

Bed Pan Flusher / Sanitizer - Energy Saver
With Hands Free Operation
Operation, Maintenance and Installation Manual
FOR REASONABLE CONNECTION WORKING SPACE ALLOW 150-200mm FROM REAR OF
FREE STANDING
'S' TRAP PIPE POSITIONING
The centre of the soil line to receive the 'S'
Trap should be approximately 272mm from
the back wall.
recommended minimum service access,
space soil line 600/700mm from side wall.
If space restrictions do not allow for
recommended side service access, we
suggest preference be given to providing
the most space available on the right hand
side as you look at the front of the machine.
This will ease any difficulty in servicing the
steam tank element and probe.
The Machine is 600mm wide and the centre of the trap is 300mm from each side.
Steam Venting
No external vent pipework is required as the machine is designed to condensate all visible steam
within the machine.
Issue 24
Note: Bell Ends can be cut off to suit
MACHINE TO WALL
To allow for normal
Diagram C2
'P' TRAP PIPE POSITIONING
The centre of the soil line to receive the 'P'
Trap should be approximately 410mm from
the floor when the unit is positioned 150mm
from the wall. Because this pipe is graded
to 5° this measurement will vary as the unit
is installed closer or further away from the
back wall.
29
Page
FREE STANDING
rd
23 August 2013