Malmet Energy Saver ES910 Operation, Maintenance And Installation Manual page 11

Bed Pan Flusher / Sanitizer - Energy Saver
With Hands Free Operation
Operation, Maintenance and Installation Manual
6. Once the machine is "loaded" the operator breaks the infra-red beam to close the door.
The display shows shut.
7. When the door is fully closed 2 Green LED's will flash in the infra-red sensor area for 8
seconds to advise the user to break the beam again to start a cycle.
The display shows rdy.
If the 8 seconds has elapsed the flashing LED will stop and the unit will not start for a cycle.
The operator has to repeat the process from Step 5 (or press manual start).
Note: If this occurs the beam must be broken twice.
Note: On 10A models if the steam generator temperature is not at 90° C and the beam
has been broken or the manual start button pressed. The display will show "CYCL",
the green led's will stop flashing and stay on. When the steam generator has reached
operating temperature the display will show Rins the wash cycle will start
automatically.
8. Once a cycle has been initiated the elements are turned on in the steam tank to start
heating the water.
The wash pump is turned on for 17 seconds for the initial wash.
The display shows rins.
Issue 24
11
Page
rd
23 August 2013