Operation
3.3.5
Adjust the Contrast of the On-board LCD
NOTE
Contrast adjustment may help improve LCD-screen legibility in a
high-temperature environment.
The on-board LCD is factory-set to be easily viewed in lighting conditions found in most work places. The
contrast can be changed.
1. Press any key to activate the LCD.
2. Use the arrow keys to highlight the information icon, , and press
3. Use the arrow keys to highlight the contrast icon,
4. Use the arrow keys to highlight an up/down arrow, and press
Refer to the pattern, Figure 3-10, to determine when the contrast is acceptable.
5. When the contrast is satisfactory, highlight
screen.
NOTE
These steps also apply to the RPC BDM.
Figure 3-10 Adjust LCD contrast
®
™
Emerson
MPH2
User Manual
, and press
to increase or decrease contrast.
and press
to return to the system-information
33
.