Communication Link With Rpc2; Figure 3-3 Configuration In-Progress Wheel - Emerson Network Power MPH2 User Manual

Operation
3.2.1

Communication Link with RPC2

When power is cycled to the MPH2, it takes a few moments to establish communication and load the
configuration information from RPC2, such as receptacle labels and IP and MAC addresses.
When configuration changes (such as turning-on/off a receptacle) require that the LCD screen update, the
configuration wheel appears and spins, Figure 3-3, to indicate that navigation is unavailable while
configuration is in-progress.

Figure 3-3 Configuration in-progress wheel

Number Description
1 Configuration wheel
® ™
26 Emerson MPH2 User Manual