Operation
3.2 View Input-level Information
The MPH2's main screen is displayed by the on-board LCD when the rack PDU is first powered up. The
input-level information is the main screen, Figure 3-2.
NOTE
After 5 minutes of no activity (no key pressed), the on-board LCD returns to
the main screen.
NOTE
During a firmware upgrade:
• The Line-input status LEDs flash red and green, and the rack PDU
continues receiving and distributing power without interruption.
Figure 3-2 Input-level information (main screen)
Number
1
Input-level metered information icon
2
Bar graph of input current
3
Link icon
4
Input voltage
5
Voltage phase
6
Information icon
®
™
Emerson
MPH2
User Manual
Description
Number
7
Receptacle icon
8
Sensor icon
9
Alarm icon
10
% Amperes used until alarm threshold.
11
Unit identification (always shows unit 1)
25
Description