Adjusting The Onboard Lcd's Contrast; Figure 17 Adjust Lcd Contrast - Emerson Network Poewr MPH2 User Manual

3.1.2

Adjusting the Onboard LCD's Contrast

The onboard LCD is factory-set to be easily viewed in lighting conditions found in most work places.
The contrast can be changed. To change the contrast:
1. Press any key to activate the LCD.
2. Press either the Right or Left arrow key to highlight the contrast icon, a circle half dark and half
white.
3. Press the Select key.
4. Use the Right or Left arrow key to highlight the Up or Down contrast icon (each is an arrow). Use
the pattern to determine when the contrast is acceptable.
5. Press Select until the screen's contrast is satisfactory
NOTE
The same steps apply to the RPC BDM.

Figure 17 Adjust LCD contrast

21
Operation
® ™
Emerson MPH2