SMC Networks Barricade SMC7401BRA User Manual page 168

The name of the upgrade file must be one of the following:
- TEImage.bin
- TEDsl.gsz
- TEAppl.gsz
- Filesys.bin
- TEPatch.bin
3. Click [Upload]. The following message box appears at the
bottom of the page:
Loading New Software:
Please do not interrupt the upgrade process.
A status page will appear Automatically when
loading is completed (about 1 minute).
4. When loading is complete, the following message appears
(the file name may differ):
File:
TEDsl.gsz successfully saved to flash. Please reboot
for the new image to take effect.
Turn power to the unit off, wait a few seconds, and turn it on
again. The new software will now be running. If the system
fails to boot or is not working properly, contact your ISP for
troubleshooting assistance.
Upgrading the Software
167