SMC Networks Barricade SMC7401BRA User Manual page 119

2. Select a [PPP interface] name from the drop-down list, and then
enter or select data for each field.
Note:
The fields are defined in the tables on pages 111 and 114.
3. Click [Submit]. A page appears to confirm your changes.
4. Click [Close] to return to the [Point to Point Protocol (PPP)
Configuration] page and view the new interface in the table.
5. Click the [Admin] tab, and then click [Commit & Reboot]
in the task bar.
6. Click [Commit] to save your changes to the permanent
memory.
Adding a PPP Interface Definition
You can create multiple PPP interfaces only if you
are using the PPPoA protocol; only one PPP
interface can be defined if you are using PPPoE.
Check with your ISP which version of the protocol
they require.
117