N Four auto-negotiating 10/100 Ethernet ports N Built-in print server N PPTP, L2TP, and IPSec pass through N Multiple user Internet access with a single-user account N Supports PPPoE and PPPoA N Plug & Play installation N Web-based management User Guide SMC7404WBRA EU...
Page 3
Wireless Broadband Router with built-in ADSL Modem From SMC’s line of award-winning connectivity solutions 38 Tesla Irvine, CA 92618 Phone: (949) 679-8000 January 2003 Part No: 750.9077, UK 750.9736 Pub No: 150000020800E R01...
Page 5
IMITED ARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller.
Page 6
* SMC will provide warranty service for one year following discontinuance from the active SMC price list. Under the limited lifetime warranty, internal and external power supplies, fans, and cables are covered by a standard one-year warranty from date of purchase. SMC Networks, Inc. 38 Tesla Irvine, CA 92618...
Page 7
FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications.
Page 8
OMPLIANCES modifications in order to maintain uninterrupted service. If trouble is experienced with this equipment, please contact our company at the numbers shown on back of this manual for repair and warranty information. If the trouble is causing harm to the telephone network, the telephone company may request you to remove the equipment from the network until the problem is resolved.
Page 9
EC Conformance Declaration - Class B This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and the Amendment Directive 93/68/EEC.
Congratulations on your purchase of the Barricade Wireless Broadband Router with built-in ADSL Modem (SMC7404WBRA EU). We are proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet. For those who want to surf the Internet in the most secure way, this Router provides a convenient and powerful solution.
Page 16
NTRODUCTION • NAT also enables multi-user Internet access via a single user account, and virtual server functionality (providing protected access to Internet services such as Web, FTP, e-mail, and Telnet). • VPN pass-through (IPSec-ESP Tunnel mode, L2TP, PPTP). • User-definable application sensing tunnel supports applications requiring multiple connections.
Applications Many advanced networking features are provided by the Barricade: • Wireless and Wired LAN The Barricade provides connectivity to wired 10/100 Mbps devices, and wireless IEEE 802.11b compatible devices, making it easy to create a network in small offices or homes. •...
Page 18
NTRODUCTION • DMZ Host Support Allows a networked computer to be fully exposed to the Internet. This function is used when NAT and firewall security prevent an Internet application from functioning correctly. • Security The Barricade supports security features that deny Internet access to specified users, or filter all requests for specific services the administrator does not want to serve.
Barricade, refer to “Configuring the Barricade” on page 4-1. Package Contents After unpacking the Barricade, check the contents of the box to be sure you have received the following components: • Barricade ADSL Router (SMC7404WBRA EU) • Power adapter • One CAT-5 Ethernet cable •...
NSTALLATION System Requirements You must meet the following minimum requirements: • Internet access from your Internet Service Provider (ISP) using a DSL modem. • A PC using a fixed IP address or dynamic IP address assigned via DHCP, as well as a gateway server address and DNS server address from your service provider.
Hardware Description The Barricade contains an integrated DSL modem and connects to the Internet or to a remote site using its RJ-11 WAN port. It connects directly to your PC or to a local area network using any of the four RJ-45 Fast Ethernet LAN ports or via a wireless network adapter.
NSTALLATION LEDs Verify Status Check the power and port LED indicators. Power Ethernet (4 LEDs) ADSL Syn ADSL Data Connect the System The Barricade can be positioned at any convenient location in your office or home. No special wiring or cooling requirements are needed. You should, however, comply with the following guidelines: •...
Connect the ADSL Line Run standard telephone cable from the wall jack providing ADSL service to the WAN port on your Barricade. When inserting an ADSL RJ-11 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated.
NSTALLATION Installing a Splitterless Connection If you are using a splitterless (G.lite) connection, then your service provider will attach the outside ADSL line directly to your phone system. In this case you can connect your phones and computer directly to the incoming ADSL line, but you will have to add low-pass filters to your phones as shown below: Plain Old...
inserting an RJ-45 connector, be sure the tab on the connector clicks into position to ensure that it is properly seated. Warning: Do not plug a phone jack connector into an RJ-45 port. This may damage the Barricade. Notes: 1. Use 100-ohm shielded or unshielded twisted-pair cable with RJ-45 connectors for all Ethernet ports.
ONFIGURING TCP/IP Configuration To access the Internet through the Barricade, you must configure the network settings of the computers on your LAN to use the same IP subnet as the Barricade. The default network settings for the Barricade are: IP Address: 192.168.2.1 Subnet Mask: 255.255.255.0 Note: These settings can be changed to fit your network requirements, but you must first configure at least one computer as described in...
Page 29
HAPTER ONFIGURING THE ARRICADE After you have configured TCP/IP on a client computer, use a Web browser to configure the Barricade. The Barricade can be configured by any Java-supported browser including Internet Explorer 4.0 or above, or Netscape Navigator 4.0 or above. Using the Web management interface, you may configure the Barricade and view statistics to monitor network activity.
ONFIGURING THE ARRICADE Navigating the Web Browser Interface The Barricade’s management interface consists of a Setup Wizard and an Advanced Setup section. Setup Wizard: Use the Setup Wizard if you want to quickly set up the Barricade. Go to “Setup Wizard” on page 4-3. Advanced Setup: Advanced Setup supports more advanced functions like hacker attack detection, IP and MAC address filtering, virtual server setup, virtual DMZ host, as well as other functions.
Setup Wizard Time Zone Click on “Setup Wizard.” The first item in the Setup Wizard is Time Zone setup. For accurate timing of log entries and system events, you need to set the time zone. Select your time zone from the drop-down list. If your area requires it, check to enable the clock for daylight saving changes, and enter the Daylight Saving Time start and end dates for your location.
ONFIGURING THE ARRICADE Internet Sharing Select the operation mode. Go to “PPPoE & PPPoA” on page 4-7 if you will use either of these modes, and go to “Multiple Protocol over ATM Mode” on page 4-10 if you will use multiple protocol routing mode.
Parameter Setting Parameter VPI/VCI Description Data flows are broken up into fixed length cells, each of which contains a Virtual Path Identifier (VPI) that identifies the path between two nodes, and a Virtual Circuit Identifier (VCI) that identifies the data channel within that virtual path. Each virtual circuit maintains a constant flow of cells between the two end points.
ONFIGURING THE ARRICADE Finish Parameter Protocol VPI/VCI AAL5 Encapsulation Your Barricade is now set up. Go to “Troubleshooting” on page A-1 if you cannot make a connection to the Internet. Description Indicates the protocol used. Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI).
PPPoE & PPPoA Parameter Username Password Retype Password VPI/VCI Description Enter the ISP assigned user name. Enter your password. Confirm the password. Enter a Domain Name Server IP address. Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). Data flows are broken up into fixed length cells, each of which contains a Virtual Path Identifier (VPI) that identifies the path between two nodes, and a Virtual Circuit Identifier (VCI) that identifies...
ONFIGURING THE ARRICADE Finish Parameter ADSL Operation Mode (WAN) Protocol VPI/VCI AAL5 Encapsulation ISP Parameters Username Password Description Indicates the protocol used Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). Shows the packet encapsulation type. The ISP assigned user name. The password (hidden).
Page 37
Parameter DHCP Parameters Default Gateway Subnet Mask Name Server 1 Name Server 2 Name Server 3 Start IP Address Number of IP Your Barricade is now set up. Go to “Troubleshooting” on page A-1 if you cannot make a connection to the Internet. Description The default gateway IP address.
ONFIGURING THE ARRICADE Multiple Protocol over ATM Mode Parameter WAN IP Subnet Mask VPI/VCI Default Gateway Enter a default gateway IP address. If the Barricade cannot find 4-10 Description Enter a Domain Name Server IP address. Enter an IP address for the Barricade WAN interface. Enter a subnet mask.
Finish Parameter ADSL Operation Mode (WAN) Protocol VPI/VCI AAL5 Encapsulation Network Layer Parameters (WAN) IP Address Subnet Mask Default Gateway Description Indicates the protocol used. Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). Shows the packet encapsulation type. Shows the WAN IP address. Shows the WAN subnet mask.
Page 40
ONFIGURING THE ARRICADE Parameter DHCP Parameters Default Gateway Subnet Mask Name Server 1 Name Server 2 Name Server 3 Start IP Address Number of IP Your Barricade is now set up. Go to “Troubleshooting” on page A-1 if you cannot make a connection to the Internet. 4-12 Description The default gateway IP address.
Advanced Setup Clicking “Advanced Setup” displays the main menu on the left-hand side of the screen and descriptive information on the right-hand side. The Main Menu links are used to navigate to other menus that display configuration parameters and statistics. Navigating the Web Browser Interface The Barricade’s advanced management interface contains eleven main menu items –...
ONFIGURING THE ARRICADE The following table briefly describes the “Advanced Setup” menu items. Menu System Wireless Routing system Sets routing parameters and displays the current routing table. Firewall SNMP ADSL Tools Status Making Configuration Changes Configurable parameters have a dialog box or a drop-down list. Once a configuration change has been made on a page, be sure to click the “APPLY”...
Note: To ensure proper screen refresh after a command entry, check that Internet Explorer 5.0 is configured as follows: Under the menu “Tools/Internet Options/General/Temporary Internet Files/ Settings,” the setting for “Check for newer versions of stored pages” should be “Every visit to the page.” System Settings Time Zone Set your local time zone.
ONFIGURING THE ARRICADE Password Settings Use this page to restrict access based on a password. By default, there is no password. For security you should assign one before exposing the Barricade to the Internet. Passwords can contain from 3–12 alphanumeric characters and are not case sensitive.
YSTEM ETTINGS Remote Management By default, management access is only available to users on your local network. However, you can also manage the Barricade from a remote host by entering the IP address of a remote computer on this screen. Check the “Enabled”...
ONFIGURING THE ARRICADE Domain Name Servers are used to map a domain name (e.g., www.smc.com) to the equivalent numerical IP address (e.g., 64.147.25.20). Your ISP should provide the IP address of one or more domain name servers. Enter those addresses on this page. 4-18...
PPPoE (PPP over Ethernet) Parameter Enable/Disable IP Address Subnet Mask Description Enables/disables the PPPoE Interface. If your IP address is assigned by the ISP each time you connect, leave this field all zeros. Otherwise, enter your ISP supplied static IP address here. If your subnet mask is assigned by the ISP each time you connect, leave this field all zeros.
Page 48
ONFIGURING THE ARRICADE Parameter VPI/VCI Encapsulation Idle Time (Minute) ISP Name 4-20 Description Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). Data flows are broken up into fixed length cells, each of which contains a Virtual Path Identifier (VPI) that identifies the path between two nodes, and a Virtual Circuit Identifier (VCI) that identifies the data channel within that virtual path.
Parameter Protocol IP Address Subnet Mask Subnet mask of the ATM interface. Description • Disable: Disables the connection. • 1483 Bridging: Bridging is a standardized layer 2 technology. It is typically used in corporate networks to extend the physical reach of a single LAN segment and increase the number of stations on a LAN without compromising performance.
ONFIGURING THE ARRICADE Parameter VPI/VCI Encapsulation Specifies how to handle multiple protocols at the ATM transport Enter the Internet Service Provider name, user name, and password for each ISP connection you have. 4-22 Description Virtual Path Indicator/Virtual Channel Indicator: Each connection must have a unique pair of VPI/VCI settings.
Parameter LAN IP IP Address IP Subnet Mask DHCP Server Lease Time Description The IP address of the Barricade. Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). To dynamically assign an IP address to client PCs, enable the DHCP (Dynamic Host Configuration Protocol) Server.
Page 52
ONFIGURING THE ARRICADE Parameter IP Address Pool Start IP Address End IP Address Domain Name Remember to configure your client PCs for dynamic address allocation. (See “Configuring Client PCs” on page 3-1 for details.) 4-24 Description Specify the start IP address of the DHCP pool. Do not include the gateway address of the Barricade in the client address pool.
IRELESS Wireless The Barricade also operates as a wireless-to-wired bridge, allowing wireless computers to access resources available on the wired LAN, and to access the Internet. To configure the Barricade as a wireless access point for wireless clients (either stationary or roaming), all you need to do is enable the wireless function, define the radio channel, the domain identifier, and the encryption options.
ONFIGURING THE ARRICADE Channel and SSID Parameter ESSID Transmission Rate Basic Rate Channel 4-26 Description Extended Service Set ID. The ESSID must be the same on the Barricade and all of your wireless clients. The default is Fully Automatic. The transmission rate is automatically adjusted based on the receiving data error rate.
IRELESS Encryption If you are transmitting sensitive data across wireless channels, you should enable encryption. You must use the same set of encryption keys for the Barricade and all of the wireless clients. Choose between standard 64-bit WEP (Wired Equivalent Privacy) or the more robust 128-bit encryption. You may automatically generate encryption keys or manually enter the keys.
Page 56
ONFIGURING THE ARRICADE To manually configure the keys, enter five hexadecimal pairs of digits for each 64-bit key, or enter 13 pairs for the single 128-bit key. (A hexadecimal digit is a number or letter in the range 0-9 or A-F.) If you use encryption, configure the same keys used for the Barricade on each of your wireless clients.
ONFIGURING THE ARRICADE Client computers can be filtered using the unique MAC address of their IEEE 802.11 network card. To secure an access point using MAC address filtering, you must enter a list of allowed/denied client MAC addresses into the filtering table. (See “Finding the MAC address of a Network Card” on page 4-61.) Parameter Filtering...
Address Mapping Use “Address Mapping” to allow a limited number of public IP addresses to be translated into multiple private IP addresses for use on the internal LAN network. This also hides the internal network for increased privacy and security. 4-31...
Page 61
If you configure the Barricade as a virtual server, remote users accessing services such as Web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP addresses. In other words, depending on the requested service (TCP/UDP port number), the Barricade redirects the external service request to the appropriate server (located at another internal IP address).
ONFIGURING THE ARRICADE Routing System These pages define routing related parameters, including static routes and RIP (Routing Information Protocol) parameters. Static Route Parameter Index Network Address Subnet Mask Gateway Click “Add” to add a new static route to the list, or check the box of an already entered route and click “Modify.”...
Parameter Interface Operation Mode Version Poison Reverse Description The WAN interface to be configured. Disable: RIP disabled on this interface. Enable: RIP enabled on this interface. Silent: Listens for route broadcasts and updates its route table. It does not participate in sending route broadcasts.
Page 64
ONFIGURING THE ARRICADE Parameter Authentication Required Authentication Code RIP sends routing-update messages at regular intervals and when the network topology changes. When a router receives a routing update that includes changes to an entry, it updates its routing table to reflect the new route.
Routing Table Parameter Description Flags Indicates the route status: C = Direct connection on the same subnet. S = Static route. R = RIP (Routing Information Protocol) assigned route. I = ICMP (Internet Control Message Protocol) Redirect route. Network Destination IP address. Address Netmask The subnetwork associated with the destination.
ONFIGURING THE ARRICADE Note: Most modern routers support RIP-2 so there is usually no need for a static route table. Firewall The Barricade’s firewall enables access control of client PCs, blocks common hacker attacks, including IP Spoofing, Land Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port loopback, Snork Attack, TCP null scan, and TCP SYN flooding.
Page 68
ONFIGURING THE ARRICADE Access Control allows users to define the outgoing traffic permitted or not-permitted through the WAN interface. The default is to permit all outgoing traffic. (See the following page for details.) The Barricade can also limit the access of hosts within the local area network (LAN).
ONFIGURING THE ARRICADE URL Blocking The Barricade allows the user to block access to Web sites from a particular PC by entering either a full URL address or just a keyword. This feature can be used to protect children from accessing violent or pornographic Web sites.
IREWALL Schedule Rule You may filter Internet access for local clients based on rules. Each access control rule may be activated at a scheduled time. Define the schedule on the “Schedule Rule” page, and apply the rule on the “Access Control”...
Page 72
ONFIGURING THE ARRICADE 3. Click “OK” and then click “APPLY” to save your settings. 4-44...
Page 74
ONFIGURING THE ARRICADE The Barricade’s firewall inspects packets at the application layer, maintains TCP and UDP session information including timeouts and number of active sessions, and provides the ability to detect and prevent certain types of network attacks such as DoS attacks. Network attacks that deny access to a network device are called Denial-of-Service (DoS) attacks.
Page 75
Parameter Defaults Stateful Packet Inspection Hacker Prevention Feature Discard Ping Discard from WAN Description This option allows you to select different application types that are using dynamic port numbers. If you wish to use Stateful Packet Inspection (SPI) for blocking packets, click on the “Yes”...
Page 76
ONFIGURING THE ARRICADE Parameter RIP Defect When hackers attempt to enter your network, we can alert you by e-mail Your E-Mail Address SMTP Server Address POP3 Server Address User Name Password Connection Policy Fragmentation half-open wait TCP SYN wait TCP FIN wait TCP connection idle timeout UDP session idle...
Page 77
Parameter Defaults H.323 data 180 sec channel idle timeout DoS Detect Criteria Total incomplete 300 sessions Defines the rate of new unestablished sessions TCP/UDP sessions HIGH Total incomplete 250 sessions Defines the rate of new unestablished sessions TCP/UDP sessions LOW Incomplete 250 sessions Maximum number of allowed incomplete TCP/ TCP/UDP...
ONFIGURING THE ARRICADE If you have a client PC that cannot run an Internet application properly from behind the firewall, you can open the client up to unrestricted two-way Internet access. Enter the IP address of a DMZ (Demilitarized Zone) host on this screen. Adding a client to the DMZ may expose your local network to a variety of security risks, so only use this option as a last resort.
SNMP Community Use the SNMP configuration screen to display and modify parameters for the Simple Network Management Protocol (SNMP). A computer attached to the network, called a Network Management Station (NMS), can be used to access this information. Access rights to the agent are controlled by community strings.
ONFIGURING THE ARRICADE Trap Parameter IP Address Community Version 4-52 Description Traps are sent to this address when errors or specific events occur on the network. A community string (password) specified for trap management. Enter a word, something other than public or private, to prevent unauthorized individuals from reading information on your system.
Page 83
Parameter Description Status Line Status Shows the current status of the ADSL line. Data Rate Upstream Actual and maximum upstream data rate. Downstream Actual and maximum downstream data rate. Operation Data/ Defect Indication Noise Margin Upstream Minimum noise margin upstream. Downstream Minimum noise margin downstream.
Page 84
ONFIGURING THE ARRICADE Parameter Loss of Power Defect Fast Path HEC Error Interleaved Path HEC Error Statistics Received Superframes Interleaved Transmitted Superframes Interleaved Received Superframes Fast Transmitted Superframes Fast 4-56 Description Failures due to loss of power. Fast Path Header Error Concealment errors. Interleaved Path Header Error Concealment errors.
Tools Use the “Tools” menu to backup the current settings, to restore previously saved settings, or restore the factory default settings. Configuration Tools Check “Backup” and click “More Configuration” to save your Barricade’s configuration to a file named config.bin on your PC. You can then check the “Restore”...
ONFIGURING THE ARRICADE Firmware Upgrade Use this screen to update the firmware or user interface to the latest versions. In the “Upgrade Target” field, choose “Firmware” or “User Interface” depending on which you want to update. Then click “Browse” to browse for the previously downloaded file. Note: For latest firmware/user interface version information and download, visit SMC’s Web site at www.smc.com.
OOLS Reset Perform a reset from this page. The configurations will not be changed back to the factory default settings. Note: If you use the reset button on the rear panel, the Barricade performs a power reset and restores the factory settings. 4-59...
ONFIGURING THE ARRICADE Status The Status screen displays WAN/LAN connection status, firmware and hardware version numbers, as well as information on DHCP clients connected to your network. The security log may be saved to a file by clicking “Save” and choosing a location.
The following items are included on this screen: Parameter INTERNET GATEWAY INFORMATION Security Log DHCP Client Log Finding the MAC address of a Network Card Windows 95/98/ME Click “Start/Run”. Type “winipcfg” and press ENTER. The MAC address is in the “Adapter Address” section. Windows NT4/2000/XP At the command prompt, type “ipconfig /all”...
Page 91
ONFIGURING After completing hardware setup by connecting all your network devices, you need to configure your computer to connect to the Barricade. First determine how your ISP issues your IP address. Many ISPs issue these numbers automatically using Dynamic Host Configuration Protocol (DHCP). Other ISPs provide a static IP address and associated numbers, which you must enter manually.
ONFIGURING LIENT 2. In “Control Panel” double-click the “Network” icon. 3. In the “Network” window, under the “Configuration” tab, double-click the “TCP/ IP” item listed for your network card. 4. Select the “IP Address” tab. 5. If “Obtain an IP address automatically”...
6. Click the “Gateway” tab and record the numbers listed under “Installed gateways.” 7. Click the “DNS Configuration” tab. Locate the DNS servers listed under “DNS Server Search Order.” Record any listed addresses. 8. After writing down your settings, check to make sure you have recorded them correctly.
ONFIGURING LIENT Disable HTTP Proxy You need to verify that the “HTTP Proxy” feature of your Web browser is disabled. This is so that your browser can view the Barricade’s HTML configuration pages. The following steps are for Internet Explorer and Netscape.
Netscape 1. Open Netscape and click the stop button. Click “Edit,” then click “Preferences...” 2. In the “Preferences” window, under “Category” double-click “Advanced,” then click “Proxies.” Select “Direct connection to the Internet.” Click “OK.” 3. Repeat these steps for each Windows 95/ 98/ME computer connected to your Barricade.
ONFIGURING LIENT 2. Type “WINIPCFG” and click “OK.” It may take a second or two for the “IP Configuration” window to appear. 3. From the drop-down menu, select your network card. Click “Release” and then “Renew.” Verify that your IP address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1.
Page 97
Follow these instructions: 1. From the Windows desktop click “Start/ Settings/Control Panel.” 2. Double-click the “Network” icon. 3. Select the “Protocols” tab. 4. Double-click “TCP/IP Protocol.” 5. Select the “IP Address” tab. 6. In the “Adapter” drop-down list, be sure your Ethernet adapter is selected.
Page 98
ONFIGURING LIENT 8. In the “TCP/IP Properties” dialog box, under the IP address tab, locate your IP address, subnet mask, and default gateway. Record these values in the spaces provided below. 9. Click the “DNS” tab to see the primary and secondary DNS servers.
Disable HTTP Proxy You need to verify that the “HTTP Proxy” feature of your Web browser is disabled. This is so that your browser can view the Barricade’s HTML configuration pages. Determine which browser you use and refer to “Internet Explorer” on page 5-4 or “Netscape” on page 5-5. Obtain IP Settings from Your Barricade Now that you have configured your computer to connect to your Barricade, it needs to obtain new network settings.
Page 100
ONFIGURING LIENT 3. Type “IPCONFIG /RENEW” and press the <ENTER> key. Verify that your IP Address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values confirm that your Barricade is functioning. 4. Type “EXIT” and press <ENTER> to close the “Command Prompt” window.
Windows 2000 1. On the Windows desktop, click “Start/Settings/ Network and Dial-Up Connections.” 2. Click the icon that corresponds to the connection to your Barricade. 3. The connection status screen will open. Click “Properties.” 2000 INDOWS 5-11...
Page 102
ONFIGURING LIENT 4. Double-click “Internet Protocol (TCP/IP).” 5. If there is IP Address information on the “Internet Protocol (TCP/ IP) Properties” dialog box, it should be recorded. Use the spaces below to record the current settings. 6. If “Obtain an IP address automatically”...
Disable HTTP Proxy You need to verify that the “HTTP Proxy” feature of your Web browser is disabled. This is so that your browser can view the Barricade’s HTML configuration pages. Determine which browser you use and refer to “Internet Explorer” on page 5-4 or “Netscape” on page 5-5. Obtain IP Settings from Your Barricade Now that you have configured your computer to connect to your Barricade, it needs to obtain new network settings.
Page 104
ONFIGURING LIENT 3. Type “IPCONFIG /RENEW” and press the <ENTER> key. Verify that your IP Address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values confirm that your ADSL Router is functioning. 4. Type “EXIT” and press <ENTER> to close the “Command Prompt” window.
Windows XP 1. Click “start/Control Panel.” 2. In “Control Panel” click “Network and Internet Connections.” 3. The “Network Connections” screen will open. Double-click the connection for this device. 4. On the connection status screen, click “Properties.” INDOWS 5-15...
Page 106
ONFIGURING LIENT 5. Double-click “Internet Protocol (TCP/IP).” 6. If there is IP Address information on the “Internet Protocol (TCP/IP) Properties” dialog box, it should be recorded. Use the spaces below to record the current settings. 7. If “Obtain an IP address automatically”...
Disable HTTP Proxy You need to verify that the “HTTP Proxy” feature of your Web browser is disabled. This is so that your browser can view the Barricade’s HTML configuration pages. Determine which browser you use and refer to “Internet Explorer” on page 5-4 or “Netscape” on page 5-5. Obtain IP Settings from Your Barricade Now that you have configured your computer to connect to your Barricade, it needs to obtain new network settings.
Page 108
ONFIGURING LIENT 3. Type “IPCONFIG /RENEW” and press the <ENTER> key. Verify that your IP Address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values confirm that your ADSL Router is functioning. Type “EXIT” and press <ENTER> to close the “Command Prompt” window.
Configuring Your Macintosh Computer You may find that the instructions here do not exactly match your operating system. This is because these steps and screenshots were created using Mac OS 8.5. Mac OS 7.x and above are similar, but may not be identical to Mac OS 8.5.
Page 110
ONFIGURING LIENT 3. If “Using DHCP Server” is already selected in the “Configure” field, your computer is already configured for DHCP. Close the TCP/IP dialog box, and skip to “Disable HTTP Proxy” on page 5-21.” 4. If there is IP Address information on the “TCP/IP” screen, it should be recorded.
Disable HTTP Proxy You need to verify that the “HTTP Proxy” feature of your Web browser is disabled. This is so that your browser can view the Barricade’s HTML configuration pages. The following steps are for Internet Explorer and Netscape. Determine which browser you use and follow the appropriate steps.
Page 112
ONFIGURING LIENT Netscape 1. Open Netscape and click the stop button. Click “Edit” and select “Preferences.” 2. In the “Preferences” dialog box, in the left-hand column labeled Category,” select “Advanced.” Under the “Advanced” category, select “Proxies.” 3. Select “Direct Connection to the Internet”...
Obtain IP Settings from Your Barricade Now that you have configured your computer to connect to your Barricade, it needs to obtain new network settings. By releasing old DHCP IP settings and renewing them with settings from your Barricade, you can verify that you have configured your computer correctly.
To use the print server built into the Barricade, you must first install the Port Monitor program as described in the following section for Windows 95/98/Me. To set up the Barricade Print Server for Windows NT, go to page 6-4. For Windows 2000/XP, see “Printer Server Setup in Windows 2000/XP”...
Page 116
RINTER ERVER ETUP IN 2. The next screen indicates that the print client uses the TCP/IP network protocol to monitor print requests. Click “Next.” 3. Select the destination folder and click on the “Next” button. The setup program will then begin to install the programs into the destination folder.
Page 117
4. Select the Program Folder that will contain the program icon for uninstalling the port monitor, and then click “Next.” 5. Enter the printer port name that will be used to identify the port monitor in your system, and click “Next.” 6.
RINTER ERVER ETUP IN Printer Server Setup in Windows NT 1. On a Windows NT platform, open the Printers window in the My Computer menu, and double-click the “Add Printer” icon. 2. Follow the prompts to add a local printer to your system. INDOWS...
Page 119
3. Select the monitored port. The default port name is “SMC100.” Then click the “Configure Port” button. 4. Enter the IP address of the Barricade and click “OK.” Click “Next” in the Add Printer Wizard dialog box. 5. Specify the printer type attached to the Barricade. 6.
RINTER ERVER ETUP IN Printer Server Setup in Windows 2000/XP You may find that the instructions here do not exactly match your version of Windows. This is because these steps and most of the screenshots were created in Windows 2000. Windows XP is similar, but not identical, to Windows 2000.
Page 121
ONFIGURING RINTER ERVICES 2. Follow the prompts to add a local printer to your system. 3. Specify the printer type attached to the Barricade.
RINTER ERVER ETUP IN 4. Select the monitored port. The default port name is “SMC100.” Click the “Configure Port” button. 5. Enter the IP address of the Barricade and click “OK.” Then click “Next” in the Add Printer Wizard dialog box. 6.
Page 123
This section describes common problems you may encounter and possible solutions to them. The Barricade can be easily monitored through panel indicators to identify problems. Troubleshooting Chart Symptom Action LED Indicators Power LED is • • PPENDIX ROUBLESHOOTING Check connections between the Barricade, the external power supply, and the wall outlet.
ROUBLESHOOTING Troubleshooting Chart Symptom LED Indicators Link LED is Off Network Connection Problems Cannot Ping the Barricade from the attached LAN, or the Barricade cannot Ping any device on the attached Action • Verify that the Barricade and attached device are powered on.
Page 125
Troubleshooting Chart Symptom Action Management Problems • Cannot connect using the Web browser • • • Forgot or lost the password Be sure to have configured the Barricade with a valid IP address, subnet mask, and default gateway. Check that you have a valid network connection to the Barricade and that the port you are using has not been disabled.
Page 126
ROUBLESHOOTING Troubleshooting Chart Symptom Wireless Problems A wireless PC cannot associate with the Barricade. The wireless network is often interrupted. The Barricade cannot be detected by a wireless client. Action • Make sure the wireless PC has the same SSID settings as the Barricade.
Ethernet Cable Caution: Do not plug a phone jack connector into an RJ-45 port. For Ethernet connections, use only twisted-pair cables with RJ-45 connectors that conform to FCC standards. Specifications Cable 10BASE-T 100BASE-TX Cat. 5 100-ohm UTP Wiring Conventions For Ethernet connections, a twisted-pair cable must have two pairs of wires. Each wire pair is identified by two different colors.
ABLES RJ-45 Port Ethernet Connection Use the straight-through CAT -5 Ethernet cable provided in the package to connect the Barricade to your PC. When connecting to other network devices such as an Ethernet switch, use the cable type shown in the following table. Attached Device Port Type MDI-X Pin Assignments...
Page 129
Straight-Through Wiring If the port on the attached device has internal crossover wiring (MDI-X), then use straight-through cable. Straight-Through Cable Pin Assignments End 1 1 (Tx+) 2 (Tx-) 3 (Rx+) 6 (Rx-) Crossover Wiring If the port on the attached device has straight-through wiring (MDI), use crossover cable.
ABLES ADSL Cable Connection Use standard telephone cable to connect the RJ-11 telephone wall outlet to the RJ-11 ADSL port on the ADSL Router. Caution: Do not plug a phone jack connector into an RJ-45 port. Specifications Cable ADSL Line Wiring Conventions For ADSL connections, a cable requires one pair of wires.
Page 131
R1 T1 1 2 3 4 5 6 6x2 Jack Figure B-3. RJ-11 Pinouts ADSL C R1 T1 R2 1 2 3 4 5 6 1 2 3 4 5 6 6x4 Jack T = Tip R = Ring Signal Name Wire Color Not used Line 2 Tip...
Standards Compliance CE Mark Emissions FCC Class B VCCI Class B Industry Canada Class B EN55022 (CISPR 22) Class B C-Tick - AS/NZS 3548 (1995) Class B Immunity EN 61000-3-2/3 EN 61000-4-2/3/4/5/6/8/11 Safety UL 1950 EN60950 (TÜV) CSA 22.2 No. 950 IEEE 802.3 10 BASE-T Ethernet IEEE 802.3u 100 BASE-TX Fast Ethernet IEEE 802.11b Wireless LAN...
Page 134
PECIFICATIONS WAN Interface 1 ADSL RJ-11 port Indicator Panel Power, Ethernet, ADSL Syn, ADSL Data Dimensions 220 x 132.8 x 30.5 mm (8.66 x 5.23 x 1.20 in) Weight 0.6 kg (1.32 lbs) Input Power 12 V 1 A Power Consumption 12 Watts max.