Quick Start Wizard Via The Local Display Push Buttons - Siemens SITRANS LR560 Operating Instructions Manual

Commissioning
6.6 Commissioning via local display
6.6.1

Quick Start Wizard via the local display push buttons

1. Press RIGHT
2. Choose Quick Start (1.), and then Quick Start Wizard (1.1.).
3. Follow the steps then choose Finish to save Quick Start parameter changes and return to
Program menu, or press LEFT
To add or delete digits using the push buttons:
When the enter icon
delete the right-most digit, RIGHT
1. Navigate to the parameter you wish to modify and press RIGHT
will be highlighted.
2. Press UP
the value from the left-most digit, starting with the plus/minus sign.
3. With the plus or minus sign highlighted, press up or down arrow to change it. Press right
arrow to highlight the next digit to the right.
4. Use UP
decimal point.
5. When the value is complete, press RIGHT
press RIGHT
To modify a text string:
1. Navigate to the parameter you wish to modify and press RIGHT
will be highlighted.
2. Follow the same steps as above, to add, delete, or modify characters.
48
to enter Program Mode.
is lit, press UP
or DOWN to delete the highlighted value, or LEFT
or DOWN to modify the highlighted digit. Scroll past 9 to reach the
to accept the value.
to return to Measurement mode.
to insert a digit on the right, DOWN
to accept the value, or LEFT
until the Enter icon is highlighted, then
Operating Instructions, 06/2018, A5E34648471-AE
to
to cancel.
to edit it. The value
to modify
to edit it. The string
LR560 (PROFIBUS PA)