Fault Reset (3.2.); Trend (3.3.); Minimum Value (3.4.1.) - Siemens SITRANS LR560 Operating Instructions Manual

Parameter Reference
8.3 DIAGNOSTICS (3.)
8.3.2

FAULT RESET (3.2.)

Purpose:
Description: Clearing a fault in one parameter of a "maintenance pair" automatically clears a fault in
Faults:
8.3.3

TREND (3.3.)

Displays the trend of the Process Variables: sensor value, and outputs from AIFB1/AIFB2.
Samples are saved every minute up to 3200 samples. Once the maximum number is
reached, saved data is overwritten from the beginning.
To view via SIMATIC PDM:
Open the menu View – Process Variables and click on the tab Trend View.
8.3.4

MINIMUM VALUE (3.4.1.)

Note
Read/write
Read only in PDM or AMS. Can be written via the handheld programmer.
Displays (in °C) the minimum temperature recorded by the internal electronics. The high and
low values are maintained over a power cycle.
Via SIMATIC PDM navigate to Maintenance and Diagnostics > Electronics Temperature.
114
Clears the following fault (Acknowledge Fault).
the second parameter of the pair. For example, entering S3 or S4 will clear a fault on
Device (Maintenance Required), and on Device (Maintenance Demanded). This ap-
plies when clearing faults via the handheld programmer or 375 Field
Communicator.
To clear a fault using the handheld programmer, enter the fault code number then
press RIGHT arrow.
Internal Temperature High
To clear a fault via SIMATIC PDM:
1. Open the menu Diagnostics – Device Diagnostics and click on Maintenance tab.
2. Click on Acknowledge Warnings in the applicable box to clear the fault.
Device Lifetime Reminder 1
Device Lifetime Reminder 2
Sensor Lifetime Reminder 1
Sensor Lifetime Reminder 2
Service Schedule Reminder 1
Service Schedule Reminder 2
Calibration Schedule Reminder 1
Calibration Schedule Reminder 2
Internal Error
Maintenance Required
Maintenance Demanded
Maintenance Required
Maintenance Demanded
Maintenance Required
Maintenance Demanded
Maintenance Required
Maintenance Demanded
Maintenance Demanded
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE