Harmar Mobility AL600 Installation And Owner's Manual page 20

Installation - AL600
With Folding 3rd Row Seating
11. Thread ½-13 nuts onto
½-13 x 4.00" L bolts. Place ½"
lock washers onto bolts. Place
mounting washers onto bolts.
12. Use an assistant to place lift onto bolts
through mounting flange on lift as shown.
If no assistant is available, follow
instructions on page11 to avoid
injury.
WARNING
20
SECTION 2 : INSTALLER
1/2-13
Hex Nut
1/2 Split
Lock Washer
Mounting
Washer
1/2 Split
Lock Washer
Mounting
1/2-13
Flange
Hex Nut
( Leveling Nut )
1/2-13 x 4.00"L bolts
| www.harmar.com | 800-833-0478
13. Place mounting washers on bolts, on top of
mounting flange on lift. Place ½" lock washers onto
bolts. Thread ½-13 nuts onto bolts.
Mounting
Washer
14. Lift front end of lift and install leveling pads
as shown. Place pads into circular cups of BA-02 as
shown. Lower lift and check with a level.
Adjust by threading nuts on leveling pads and
threading bottom nut under mounting flange.
Le v e lin g
P a d w /
Ja m N u t