Set Mode; Set Mode Programming - Icom IC-M73 Instruction Manual

■ SET mode programming

SET mode is used to change the condition of 17 transceiver
functions: beep tone function, weather alert function, scan
type, scan resume timer, auto scan function, dual/tri-watch
function, monitor key action, backlighting function, LCD con-
trast selection, auto power save function, Scroll type selec-
tion, Scroll speed selection, RX noise cancel function, TX
noise function, RX bass boost function, TX bass boost func-
tion and automatic recording threshold level selection.
D SET MODE ITEMS
Beep tone* Weather alert
Automtic recording threshold level
TX bass boost
RX bass boost
TX noise cancel RX noise cancel
D SET mode operation
q Turn power OFF.
w While holding down [

SET mode.

• "BEEP" (Beep tone function setting) appears.
e Push [ ] , or push [
sired item.
r Push [Y]/[Z] to select the desired condition of the item.
t To exit the SET mode, push [16•9].
Priority scan Scan resume timer
: Push [ ], or
while holding down [ ], push [Y]
: While holding down [ ], push [Z]
*Starting item
Scroll speed
SET MODE
] , turn power ON to enter the
] and [Y]/[Z] to select the de-
Auto scan start function
Dual/Tri-watch
Monitor key
action
Display
backlight
LCD
contrast
Scroll type Power save function
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
25