Set Mode; Set Mode Programming - Icom IC-GM1600E Instruction Manual

■ SET mode programming

SET mode is used to change the condition of 9 transceiver
functions: Beep tone function, Monitor switch action, LCD
contrast selection, Self check function, Battery voltage indi-
cator, Signal strength indicator, Squelch sensitivity function,
VOX gain and VOX delay.
D SET MODE ITEMS The displays show the default settings, and the selected item is displayed in the dotted circle.

SET MODE

D SET mode operation
.
q Turn power OFF
w While pushing [SQL•
MONI
SET mode.
• "bp" (Beep tone function setting) appears.
e Push [SQL• ] or [SQL•
MONI
desired item, if necessary.
r Push [Y]/[Z] to select the desired condition of the item.
t Push [16] to exit the SET mode.
5
], turn power ON to enter the
] and [Y]/[Z] to select the
MONI
4
5
11 11