Automatic Recording Function - Icom IC-M73 Instruction Manual

7
FUNCTION MODE OPERATION

■ Automatic recording function

When this function turns ON, the transceiver automatically
records the receiving signal into the memory.
A maximum recording length of 60 seconds can be recorded
into the memory.
• The transmitting signal cannot be recorded into the memory.
• The recording threshold level can be set in the set mode. See p. 30
for details.
• Example— Automatic recording
[Less than 60 seconds]
Starts recording
40 seconds
[More than 60 seconds]
Starts recording
These contents
won't be recorded.
20
Stops recording
When receiving signal within 60
seconds, this function records
the all contents.
Stops recording
60 seconds
After passing 60 seconds from
starting automatic recording, this
function records the 60 seconds
before stopping the record.
q Push [F] to enter the function
mode, and then push [Y]/[Z] to
select the automatic recording
function.
• "A-REC" appears.
w P u s h [ H / L • K E Y ] t o t u r n t h e
function ON or OFF.
• The automatic recording icon is
appeared.
• T h e f u n c t i o n m o d e w i l l b e
a u t o m a t i c a l l y c a n c e l l e d a f t e r
pushing [H/L•KEY].
e When the transceiver receives
a signal, it will automatically re- automatically re-
cord the receiving signal into the
memory.
• "REC" appears while recording.
• The recording will automatically
stop when the receiving signal disappears.
Automatic recording
mode appears.
Automatic recording
icon is appeared.
"REC" is appeared
while recording.