Set Mode; Set Mode Programming - Icom IC-GM1600 Instruction Manual

■ SET mode programming

SET mode is used to change the condition of 11 transceiver
functions: beep tone function, monitor switch action, backlit
function, LCD contrast selection, auto power save function,
self check function, battery voltage indicator, signal strength
indicator and squelch sensitivity function.
D SET MODE ITEMS The displays show the default settings, and the selected item is displayed in the dotted circle.
Squelch sensitivity
Signal strength indicator
Battery voltage
D SET mode operation
q Turn power OFF.
w While pushing [SQL•
e Push [SQL•
r Push [Y]/[Z] to select the desired condition of the item.
t Push [16] to exit the SET mode.
Beep tone
Starting item
Push and
: Push
: Push and
Self check

SET MODE

], turn power ON to enter the
MONI
SET mode.
• "bp" (Beep tone function setting) appears.
] or [SQL•
MONI
the desired item, if necessary.
Auto power save
5
] and [Y]/[Z] to select
MONI
Monitor switch
Backlighting
LCD contrast
5
11