Icom IC-M73 Instruction Manual page 36

8
SET MODE
D LCD contrast selection
The contrast of the LCD can be selected from Hi (default)
and Lo.
High contrast (default)
D Auto power save function
The auto power save function reduces current drain by
deactivating the receiver circuit for preset intervals.
• ON : The power save function is turned ON. The power save
function will activate when no signal is received, and no
operation is performed for 5 seconds
• OFF : The power save function is turned OFF.
Power save ON
(default)
28
"
Push
Low contrast
"
Push
Power save OFF
" D Channel name scroll type
Selects the channel name/comment scroll type from 1 and 2.
• 1: The first 7 characters are displayed for 1 second (approx.) then
scrolls. When the channel name/comment is 7 character or less,
it does not scroll (default).
• 2: The channel name/comment scrolls regardless of the number
of characters after no name/comment (blank) is indicated for 1
second.
"
Scroll type 1 (default)
D Scrolling speed
Selects the channel name/comment scroll speed.
• 1: Scrolls 3.33 characters in a second.
• 2: Scrolls 2.5 characters in a second.
• 3: Scrolls 2 characters in a second.
Scroll speed 1 (default)
"
Push
Scroll type 2
"
Push
Scroll speed 3
"
"