Set Mode Items - Icom IC-M73 Instruction Manual

8
SET MODE

■ SET mode items

D Beep tone function
Selects the key touch beep sound ON or AJ, or turns sound
OFF.
• ON : A fixed beep sounds (default)
• AJ : The preset beeps (e.g. do, re, mi) sound
• OFF : Silent operation
Beep tone ON (default)
D Weather alert function
A NOAA broadcast station transmits a weather alert tone
before any important weather announcements. When the
weather alert function is turned ON, any detected weather
alert will make the IC-M73 activate a blinking "WXALT" alert
indicator on the function display and repeatedly sound a
beep tone. The blinking and beeping stops when the radio
is picked up and operated. The previously selected weather
channel is checked any time during standby, or while scan-
ning, when the power save function is activated.
• "ALT" appears when the function is set ON.
Weather alert function
OFF (default)
26
"
Push
Beep tone OFF
"
Push
Weather alert function
ON
D Priority scan function
"
The transceiver has 2 scan types— normal (OFF) and
priority (ON) scans. Normal scan searches all TAG channels
in the selected channel group. Priority scan searches all TAG
channels in sequence while monitoring Channel 16.
Normal scan (default)
D Scan resume timer
"
The scan resume timer can be set as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until a received signal disappears. When ON is selected, the
scan pauses for 5 seconds after receiving a signal and then
resumes even if the signal has been received.
Scan resume timer
OFF (default)
"
Push
Priority scan
"
Push
Scan resume timer
ON
"
"