Icom IC-M73 Instruction Manual page 32

7
FUNCTION MODE OPERATION
e Push [Y]/[Z] to select a char-
acter.
r Push [CH/WX• U/I/C] to move
to the right; then push [Y]/[Z]
to select a character.
• Pushing [SCAN•DUAL], moves to
left
t After inputting the 10-digit ATIS
code, push [H/L•KEY] to write
the code into the memory, then
return to normal operation.
24
D ATIS code confirmation
(When the ATIS code has been programmed)
q Push [F] to enter the function mode, and then push [Y]/
[Z] to select the ATIS code programming function.
• "ATIS ID" appears.
w Push [H/L•KEY] to confirm the ATIS code.
• "Id" and "ATIS" appear.
• The ATIS code is displayed and
scrolls at the channel comment
indicator.
e Push [H/L•KEY] to return to
normal operation.
Scrolls
Scrolls