Hach SC1500 User Manual page 5

This symbol, when noted on the product, identifies the location of a fuse or current limiting device.
This symbol indicates that the marked item requires a protective earth connection. If the instrument is
not supplied with a ground plug on a cord, make the protective earth connection to the protective
conductor terminal.
Product overview
Network and access point security is the responsibility of the customer that uses the wireless instrument. The
manufacturer will not be liable for any damages, inclusive however not limited to indirect, special, consequential
or incidental damages, that have been caused by a gap in, or breach of network security.
The sc1500 is a controller for digital analytical devices (e.g., sensors and analyzers). Refer to
Figure 1.
The controller is available with optional relays and analog outputs (4–20 mA). The optional relays are
used to control external devices (e.g., control devices and alarm devices). The optional analog
outputs are used to supply measurement values to external devices.
The controller is configured and operated with a mobile application on a customer-supplied iOS
®
an Android device with an internet browser that is connected to the internet. The controller
communicates on a LAN, Wi-Fi or cellular network.
Figure 1 Product overview
1 USB connector (refer to
network on page 18)
2 USB box
3 Status indicator light (refer to
4 sc1500 controller
N O T I C E
Connect to a cellular
Table 1)
5 Wall mounting slots
6 Pole mounting holes
7 Power cord (or conduit hub)
8 Electrical connectors and fittings (refer to
on page 9)
®
or
Figure 6
English 5