Wall Mount - Lutron Electronics Sivoia QED Roller 64 Installation Instructions Manual

4
Pre-drill for Cable Run
DANGER - Locate and lock breaker to the shade power supply in the OFF position or
unplug the power plug-in transformer before doing any wiring.

Wall Mount

4.1
Choose one of the options below to drill for cable access.
Note: Cable should exit from wall, ceiling, or jamb on EDU side of system.
Note: Leave 12-18" (30-45 cm) of cable exposed.
Wall Mount with wires through:
A) Wall: 1" in from end of system and .5" from top of bracket
B) Ceiling: .5" in from end of system and .5" from mounting wall
C) Jamb: 1" from top of bracket and .5" from mounting wall
Wall Mount
A
SIVOIA QED Roller 64 Installation Instructions
TM
B
6
C