Table of Contents
Advertisement
12
Setting Limits from the EDU
Setting the Open Limit from the EDU
Note: Setting the Open Limit lower than the Close Limit will cause the shade to move down
when raise is pressed and up when lower is pressed.
12.1
Tap the "Open Limit Button"
(
), the green LED on the
roller shade EDU will turn on
steady, indicating that the EDU
is in "Set Open Limit Mode."
12.2
Adjust the position of the
EDU to the desired Open
Limit using the adjustment
buttons (
).
12.3
Press and hold the "Open
Limit Button" (
) for 5
seconds. The green LED on
the roller shade EDU will
flash for 2 seconds, then go
dark, indicating that the
current position has been
stored as the Open Limit.
SIVOIA QED
Roller 64 Installation Instructions
TM
17
Advertisement
Table of Contents
