Advertisement
»
INSTALLATION INSTRUCTIONS
ASSEMBLY OF THE OCTO+ POOL STRUCTURE (CONTD.)
> >
Recommendations and advice:
- Before beginning assembly, identify the various slat types with reference to the exploded view at the end of this
document.
- Establish the fi nal orientation of your pool, the skimmer should be oriented facing into prevailing winds. The skimmer
should be mounted on a side that starts with a type A slat.
- While assembling the walls, make sure that each slat is fully engaged before starting on the next.
- You may need to use a hammer and a clamp to remedy any slight warping of the slats. Do not strike the wood directly,
use the protective brace (provided).
- During assembly, check regularly that the walls are level and the 4 diagonals are equal in length.
- To avoid the risk or injury or damage to the liner, take care to eliminate any splinters during and after assembly.
- Please refer to the various illustrations provided in this document.
- If you intend to fi t your pool with a counter swim treadmill, you will need to incorporate the 2 slats specially prepared
to mount this option.
Layout
Fit 2 type A half-slats and 2 type C half slats together with 4 type B wall slats according to the illustration above. The male side
(double tongue) should face upwards (see the detail below).
25
Fit the remaining slats together using type B slats on the short sides and type D slats on the long walls. Take care to correctly
position the pierced slats (type E) that will hold the return and vacuum fi ttings, the bottom skimmer slat (type F) and, if
necessary, the 2 optional slats from the counter swim unit kit. (Refer to the exploded view at the end of this document for the
position of these slats). In the case of a skimmer, the slat that will hold the return fi tting (E) should be positioned above 4 type
B slats + 1 type A slat. The type F slat should be located on the same side in the last row of this step. Note the position of the
type E slat.
/ OCTO & OCTO+
Pool measurements
+460
+540
+640
+840
26
A
B
C
D
4.28
2.78
3.84
4.43
4.88
2.78
4.28
5.01
5.89
3.50
5.20
6.07
7.89
4.35
6.89
8.09
proswell.fr
11
Hide quick links:
Advertisement
