Advertisement
»
INSTALLATION INSTRUCTIONS
GUARANTEES
> >
WOODEN COMPONENTS: 10 year guarantee from the manufacturer against insect infestation and rotting (wood is high
pressure autoclaved in accordance with the standards in effect).
This guarantee does not cover natural warping of the wood (appearance of cracks, splits that in no way impact the mechanical
strength of the wood) or changes in colour attributable to weathering. Defects resulting from errors in mounting or storage are
also excluded from the scope of this guarantee: deformed wall slats (exposure to sunlight, assembly deferred after opening the
package), slats altered or broken due to assembly in a manner other than that set out in the installation instructions.
It should also be noted that the any cutting of wood elements, for any reason whatsoever, will cancel the guarantee
against insect infestation and rotting for the altered element.
ACCESSORIES: according to the conditions of coverage against manufacturing defects and assembly defects effecting
the various accessories comprising the pool and that could impinge upon its normal use. The guarantee conditions
stipulate specific periodic inspections and maintenance that must be carried out for the pool to run correctly. The
successful outcome of any claim made under the aforementioned guarantee will be contingent on strict adherence to
its conditions. This guarantee does not cover corrosion that may occur over time, nor does it cover damage caused by
inappropriate handling during assembly or use of accessories (impacts, scratches, etc) or incidents not directly related
to normal usage of the pool or its accessories. All of these guarantees apply to parts recognised as defective by our
services and are limited to replacement of the implicated item(s). The costs of dismantling and reassembly are not
covered.
GUARANTEE CONDITIONS COVERING ITEMS FROM THE ACCESSORIES AND OPTIONAL EQUIPMENT KIT
All of the components of the accessories kit are guaranteed 2 years (except the bubble cover and winter cover).
ARTICLE
Subject and scope of the guarantee
LINER
- Leaktightness of welds.
- The guarantee is limited to replacement or
repair of the liner recognised as defective
without any other damages or interest.
CAUTION!
The following problems, associated with inappropriate use or maintenance of the membrane, are not covered in the
scope of the guarantee
- folds that appear after the liner has been fitted, these can be caused by sliding of the membrane on loose soil or an uneven
surface, or physico-chemical properties of the pool water that are outside the acceptable ranges: water temperature should
be less than 28°C, pH should be between 7.2 and 7.6 and the concentration of the sterilising agent should be within the range
recommended by the manufacturer of the water treatment products.
- Folds that remain despite following all the instructions regarding fitting of the liner should be reported immediately to
your Procopi agent.
The appearance of yellow stains or discolouration along the water line.
These may be the result of deposition of organic compounds floating on the water surface (sun creams and oils, residue of
hydrocarbon combustion or smoke from wood fires). To prevent this from happening, clean the water line regularly using
products designed for this purpose. (not supplied) and a non-abrasive sponge.
Very hard water can also be the cause of this type discolouration due to the build up of calcium deposits on the mem-
brane. Hard water (TH greater than 250 ppm) should be treated with a product to eliminate calcium and suitable for use
in pools (not supplied).
- Stains caused by the growth of algae and micro-organisms: the pool water should be treated regularly with an appro-
priate dose of algicide.
- Stains, discolouration and wrinkles caused by direct contact with oxidizing agents (thrown directly into the pool) or
pockets of excessively high concentrations of oxidising agents (frequently associated with failure to run filtration while
the oxidising agents are dissolving).
- Stains caused by stagnation and/or decomposition of a foreign body in direct contact with the liner (dead leaves,
oxidizable metallic objects, miscellaneous detritus, etc.)
- Damage caused by direct contact with incompatible materials such as bitumen, tar, oils, polystyrene panels, polyurethane. Never
apply adhesive tape or glue to the membrane.
- Tears that occur while fitting the liner caused by shifting the liner without releasing it from the liner locking track first.
28
proswell.fr
/ OCTO & OCTO+
Term of the guarantee as of the date of
purchase
10 years against leaks
2 years against stains
Conditions governing
acceptance of a claim
Adherence to
conditions governing
fitting, use and
maintenance.
Hide quick links:
Advertisement
