Guarantee - Procopi ProSwell Weva octo 440 Installation Instructions Manual

»
INSTALLATION INSTRUCTIONS
GUARANTEES (contd)
> >
ARTICLE Subject and scope of the

guarantee

POOL Leaktightness and durability
FITTINGS of the pool fittings
ARTICLE Subject and scope of the
guarantee
FILTER + Leaktightness of the filter
CONNECTIONS tank.
Leaktightness of the
connection elements.
CAUTION! The following problems, associated with inappropriate use of the filtration components, are not covered
under the terms of this guarantee:
- Leaks caused by running the filter at an operating pressure greater than 1.2 bar
clogged filter medium, etc.), or installing the filter above the water level without a vent and check valve. (see the installation
instructions)
- "stress-cracking" of ABS parts (valve, nuts) caused by surface reactants found in some types of grease: grease should not
be used on these types of components.
- The continuous expulsion of sand if sand with a grain size of less than 0.6 mm is used. (the sand supplied has the correct
grain size).
ARTICLE Subject and scope of the
guarantee
PUMP Motor operation
Operation and leaktightness
of the hydraulic components.
CAUTION! The following problems, associated with inappropriate use of the pump, are not covered under the terms of
this guarantee:
- Running the pump 'Dry' (absence of water, clogging of the pre-filter)
- Running the pump without the pre-filter
ARTICLE Subject and scope of the
guarantee
SUMMER Fit for purpose on delivery
COVER
RECOMMENDATION! While the cover is not rolled out over the surface of the water, it should be dried, rolled up and
stored out of the sunlight.
ARTICLE Subject and scope of the
guarantee
WINTER Fit for purpose on delivery
COVER
RECOMMENDATION ! Avoid placing too much traction on the bungee cord, this could pull out the eyelets.
Monitor water quality during the winter. Excessively high concentrations of treatment chemicals, a pH that is
too low or too high, could result in discoloration or damage to the cover material
To prevent the development of mould during periods while the cover is not in use, take care to dry and fold
the cover carefully before storing it.
ARTICLE Subject and scope of the
guarantee
MAINTENANCE Fit for purpose on delivery
ACCESSORIES
/ OCTO & OCTO+
Term of the guarantee as of
the date of purchase
10 years
Term of the guarantee as of
the date of purchase
5 years on the filter tank
Term of the guarantee as of
the date of purchase
2 years
Term of the guarantee as of
the date of purchase
2 years
Term of the guarantee as of
the date of purchase
2 years
Term of the guarantee as of
the date of purchase
2 years
Conditions governing acceptance of a claim
Conditions governing acceptance of a claim
The hydraulic installation and notably the
pump, should generate an operating pressure
less than 1.2 bar.
Regular back washes to clean the filter to avoid
clumping of the filter medium.
(use of a pump that is too powerful,
Conditions governing acceptance of a claim
See below and regular cleaning
Conditions governing acceptance of a claim
Conditions governing acceptance of a claim
Conditions governing acceptance of a claim
29
proswell.fr