Explosion Protection Identifi Cation Fm; German Regulations And Guidelines - WAGNER GM 5000EAC Operating Manual

EDITION 03/2012
OPERATING MANUAL
Cleaning
If there are deposits on the surfaces, the unit may form electrostatic charges. Flames or
sparks can form if there is a discharge.
Remove deposits from the surfaces to maintain conductivity.
Use only a damp cloth to clean the unit.
2.5.3
EXPLOSION PROTECTION IDENTIFICATION FM
C
US
This device has been manufactured and tested according to the FM (Factory Mutual)
standard „Class Number 7260" (Approval Standard for Electrostatic Finishing Equipment)
by FM. All tested combinations of devices including accessories are given in the FM Control
Document with part number 2316160.
2.6

GERMAN REGULATIONS AND GUIDELINES

a) BGV A3 Electrical units and equipment
b) BGR 500 Part 2, Chap. 2.36 Working with liquid ejection devices
c) BGR 500 Part 2, Chap. 2.29 Using coating materials
d) BGR 104 Explosion protection rules
e) TRBS 2153 Avoiding ignition risks
f ) BGR 180 Setting up for cleaning with solvents for cleaning workpieces with
solvents
g) ZH 1/406 Guidelines for liquid ejection devices
h) BGI 740 Painting rooms and equipment
j) BGI 764 Electrostatic coating
j) Betr.Sich.V. Plant Safety Ordinance
Note: All titles can be ordered from Heymanns Publishing House in Cologne, or they are
to be found in the Internet.
PART NUMBER DOC 2319150
For Electrostatic Finishing Applications
using Class I, Group D, Spray Material
In accordance with 2316160
GM 5000EAC.
(the device is in submission)
12