Control Panel - Table - Roland VersaUV LEJ-640 F User Manual

Control Panel - Table

2e – Alphanumeric Keys
When these are pushed, they
allow to set numeric or alpha-
numeric data.
2c - Display
It displays all the
actions being
executed.
2d - Commands
Keys
When pushed
they activate the
command related
to the display.
2n – Arrows Keys
They have 2 functions:
The rst is used to move the printing unit,
- the right arrow, when pushed, moves the
printing unit forward
- the left arrow, when pushed, moves the
printing unit backward
- the top arrow, when pushed, raises the
printing unit
- the low arrow, when pushed, lowers the
printing unit
In the second function, when they are pushed,
they move from one parameter to the other.
When pushed it allows to enter the printing mode.
When pushed it allows to enter in the machine parameters.
When pushed it allows to enter in the machine settings.
When it is visualized it means that there are problems/errors or there is an emergency key armed (to debug it you
need to rearm it and then push the green key to start).
When pushed it allows to get back to the earlier screen page.
Part Names and Functions
2g – HOME Key
When this is pushed, it
places the printing bar
in the last origin set.
2p – ESC Key
When pushed is cancels
the last operation.
2h – DEL Key
When pushed it deletes the
numeric or alphanumeric
data.
2a – Emergency/Stop Key
When pushed, it stops imme-
diately all the phases of the
machine, cutting the tension.
When rearmed it doesn't re-
start the machine but allows
the insertion of tension.
2m – SHIFT Key
It is used at the same time
of other keys and it assumes
speci c functions.
2o – ENT Key
When pushed it con rms the
numeric or alphanumeric data
inserted.
2b – Start Key
When pushed it allows the
start of the machine.
When the symbol
is active it means that to work
you need to push the Start
Key, this will allow to act on
the commands of the table
commands panel.
1
9